Class C microprismatic film according to ECE 104 Flexible with sealed edges.
Highly effective and durable, suitable for mandatory contour marking of vehicles. V23 marking.
The 997 Series Flexible Prismatic in continuous presentation, with ECE 104 Approval, is extremely flexible to adapt perfectly to any tarpaulin.
Series 997S Prismatic Flexible in pre-cut presentation, with ECE 104 Approval, is extremely conformable for use on tarpaulin substrates.
3M™ Diamond Grade™ Retroreflective Vehicle Marking Film Series 997 is designed to increase visibility when applied to tarpaulin sidewalls.
Continuous 997 film offers excellent retroreflectivity and gloss.
Warranted for 8 years.
Meets UNECE 104 requirements.
Available in yellow, white and red.
3M offers a range of approved retroreflective marking tapes that carry the mandatory "E-mark" and meet all the requirements of the ECE104 regulation.
All marking tapes are classified as Class C, which means they are the brightest markings allowed by the regulations.
In addition, they are easy to apply, resistant to peeling and other damage, and ensure that they retain their brightness and color even in the harshest working conditions.
Also in accordance with AENA ED 2013 Platform Safety Regulations point A.6.A EXA 77.
- Fewer accidents mean less downtime, fewer lost contracts and a savings in repair costs
- Improve corporate image by being more proactive about security.
- Protect your company against possible legal action related to the security of third parties.
- With the approval of Class C UN-ECE 104.
- PVC-free product construction with solvent-free adhesive technology.
- Bright and vivid colors.
- Superior day and nighttime shine.
- No penetration of dirt and water due to edge sealing.
- Robust tape easy to apply without the need for application tape.
Marking of the rear of the van.
Lateral marking of the van or commercial vehicle.
Marked in two colors on the side and back.
Easy to install and cut.
The regulation stipulates that long and heavy goods vehicles registered as from July 10, 2011 must carry an approved reflective marking around the vehicle, in order to help other drivers to identify these vehicles, allowing them to adapt their driving to the circumstances and to protect users on the road.
public road. For heavy transport vehicles, registered prior to that date, the installation of the distinctive will be voluntary.
This sign will be mandatory for vehicles wider than 2.10m and longer than 6m, including the following categories:
However, it is advisable to voluntarily install this sign on other motor vehicles with at least four wheels, dedicated to the transport of goods or persons with more than eight seats, not including the driver's seat, and on other trailers and semi-trailers with a maximum mass of more than 0.75 tons.
The use of this new sign is intended to increase the visibility of the vehicle, when viewed from the side or rear of the vehicle, by reflecting light from a light source independent of the vehicle.
According to a study conducted by the U.S. Department of Transportation, contour marking of heavier vehicles would reduce accidents involving them by almost 30%.
MANDATORY USE
Trucks over 7.5 tons and over 6 meters long and 2.1 meters wide, as well as trailers and semi-trailers with a maximum weight over 3.5 tons, registered since July 10, 2011.
VOLUNTARY USE
Vehicles intended for the transport of goods that are not required to be registered before July 10, 2011 and for all those goods transport vehicles that are not prohibited from being installed.
PROHIBITED USE
Motor vehicles dedicated to the transport of persons, with a maximum of 8 seats and for trailers or semi-trailers with a maximum mass of less than 0.75 tons.
